| MIL-STD-105 |
Provisions Governing Qualifications (For Qualified Products Lists) |
| MIL-P-116J |
Sampling And Inspection Procedures |
| MIL-STD-130F |
Identification Marking |
| MIL-B-131H |
Barrier Material: Water Vaporproof, Flexible |
| MIL-STD-190C |
Identification Marking |
| MIL-H-370F |
Hoses & Assemblies, Nonmetallic: Rubber, Liquid Fuel |
| MIL-STD-407 |
Visual Inspection Guide For Rubber Molded Items |
| MIL-STD-417A(MR) |
Classification System & Tests For Solid Elastometic Materials (Symbols & Tests) |
| MIL-G-432G |
Gaskets, Nonmetallic, Synthetic Rubber |
| MIL-W-530H |
Webbing-Textile, Cotton, General Purpose, Natural Or In Colors |
| MIL-I-631C |
Insulation, Electric, Synthetic, Resin Composition, Non Rigid |
| MIL-STD-670B |
Classification System & Tests For Cellular Elastomeric Materials |
| MIL-HDBK-695C |
Recommended Shelf Life For Rubber Products |
| MIL-H-775E |
Hose & Assemblies: Rubber, Plastic, Fabric, Or Metal (Including Tubing) And Associated Hardware: Packaging |
| MIL-C-882E |
Cloth, Duck Cotton Or Cotton-Polyester Blend, Synthetic Rubber, Impregnated, and Laminated: Oil Resistant |
| MIL-R-900F |
Rubber Gasket Material (Solid) 45 Duro |
| MIL-A-907E |
Anti-seize Thread Compound, High Temperature |
| MIL-M-910E |
Navy Floor Mats, Cellular Base, Solid Cover |
| MIL-D-1000B |
Drawings, Engineering And Associated Lists |
| MIL-G-1086E |
Gasket Material, Synthetic Rubber (For Bolted Steel Tanks) |
| MIL-Y-1140H |
Yarn, Cord, Sleeving, Cloth & Tape-Glass |
| MIL-G-1149C |
Gasket Material, Solid Rubber, 50 To 65 Duro |
| MIL-STD-1523A |
Age Controls Of Age-Sensitive Elastomeric Material (For Aerospace Application) |
| MIL-D-2222F |
Dough Trough: Bakers (For Mobile Bakery M-534) |
| MIL-F-2312F |
Mildew Resistant & Moisture Resistant Treatment For Felt, Wool, Or Hair |
| MIL-C-2522E |
Cord, Fibrous, Linen, Shock Absorber Serving Use |
| MIL-A-002550C(AR) |
General Requirements For All Types Of Ammunition (Non-Nuclear & Nuclear) and All Components, Propellants, Explosives & Other Supplies In Support Of Ammunition |
| MIL-R-2765D |
Rubber Sheet, Strip, Extruded, And Molded Shapes (Solid) |
| MIL-R-2778B |
Rubber Sheet, Solid, Un-vulcanized, High Graphite, Gasket Use, Symbol 2352 |
| MIL-I-2781E |
Insulation, Pipe, Thermal Up To 1200* F |
| MIL-I-2819F |
Insulation, Block, Thermal, High-Temp., Mineral Type |
| MIL-P-2911A |
Packing Assembly, Hydraulic Conical And V Types |
| MIL-S-2912F(SH) |
Solid Synthetic Rubber Compound Battery Compt. Lining-Acid & Oil Resistant |
| MIL-G-3036C |
Grommets, Rubber, Hot-Oil & Coolant Resistant |
| MIL-R-3065E |
Solid Rubber, Tolerance & Quality Requirements |
| MIL-C-3133C |
Molded Or Fabricated Parts Of Cellular Elastomeric Materials |
| MIL-D-3135G |
Deck Covering Underlay Materials To Smooth The Surface Of Steel Decks Before Applying Deck Covering Materials |
| MIL-I-3158D |
Insulation Tape, Electrical Glass-Fiber (Resin-Filled) And Cord, Fibrous-Glass |
| MIL-R-3533B |
Rubber, Synthetic: Sheet, Strip And Molded |
| MIL-G-3859 |
|
| MIL-H-3868F |
Grease Gun High And Low Pressure For Hose Assemblies, Non-Metallic |
| MIL-I-3930E |
Insulation & Jacketing Compounds, Electrical (For Cable, Cords & Wire) |
| MIL-H-3992D |
Air And Vacuum Brake, Automotive Hose & Assemblies, Rubber |
| MIL-T-4053B |
Tape, Pressure-Sensitive, Adhesive (Corrosion-Resistant) |
| MIL-C-4109F |
Quick-Disconnect Coupling Halves, Low Pressure, Air Hose |
| MIL-B-4792D |
Round Rubber Bumper, Sponge Rubber, Open Cell, RS12 AB, PH 7.3 to 7.4 With Fabric Cover |
| MIL-P-4861B |
Packaging Of Packing, Preformed Rubber |
| MIL-R-5001A |
Lates Foam, Rubber Cellular Sheet, Molded And Hand Built |
| MIL-W-5044C |
Walkway Compound, Non-Slip & Walkway Matting |
| MIL-P-5315B |
Hydrocarbon Fuel Resistant Packing, Preformed |
| MIL-P-5510C |
Packing, Preformed, Straight Thread Tube Fitting Boss, TY-1, Hydraulic (-65* To 160* F) |
| MIL-P-5516C |
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160* F |
| MIL-T-5544B |
Thread Compound, Antiseize, Graphite Petroleum |
| MIL-F-5577B |
Fittings, Tank, Powerplant Fluid, Removable |
| MIL-H-5593C |
Low Pressure Flexible Hose For Use In Aircraft Applications |
| MIL-C-5651D |
Cord, Elastic, Exerciser And Shock Absorber, For Aeronautical Use |
| MIL-H-6000B |
Rubber Hose, (For Fuel, Oil, Coolant, Water And Alcohol) |
| MIL-H-6083E |
One Grade Of Petroleum Base Hydraulic Fluid Identified By Military Symbol OHT And NATO Symbol C-635 |
| MIL-R-6130C |
Rubber, Cellular, Chemically Blown |
| MIL-C-6183B |
Cork And Rubber Composition Sheet: For Aromatic Fuel And Oil Resistant Gaskets |
| MIL-H-6615E |
Hose Assemblies, Rubber, Fuel And Water, With Reattachable Couplings, Low Temp |
| MIL-T-6841C |
Tape And Sheet, Adhesive, Rubber And Cork Composition |
| MIL-R-6855D |
Rubber (Solid) Sheets, Strips, Molded Or Extruded |
| MIL-C-6985B |
Flat Band Hose Clamps |
| MIL-A-7021C |
Asbestos Sheet, Compressed For Fuel, Lubricant, Coolant, Water, And High Temp. Resistant Gaskets |
| MIL-R-7362D |
Rubber, Synthetic, Solid, Sheet, Trip & Fabricated Parts, Synthetic Oil Resistant |
| MIL-H-7365D |
Air Duct Hose Assemblies For Ground Heaters |
| MIL-L-7808J |
Lubricating Oil Aircraft Turbine Engine, Synthetic Base |
| MIL-H-7938A |
Flame-Resistant Rubber Hose For Fuel And Oil Lines In Aircraft Engine Installations, Tanks, And Other Combat Vehicles |
| MIL-C-7966C |
Nylon Base Rubber Coated Cloths |
| MIL-C-8068B |
Rubber-Coated, Fuel Resistant-Cloth Coated, Nylon |
| MIL-C-8087C(ASG) |
Core Material, Foamed In Place-Urethane Types |
| MIL-S-8660C |
Nonmelting, Heat Stable Silicone Compound For Use In High Tension Electrical Connections. Temp Range From -54* C (-65* F) To +204* C (400* F) |
| MIL-H-8788C |
High Pressure Hydraulic Hose |
| MIL-R-8791C |
Retainer, Packing, Hydraulic, And Pneumatic, Tetrafluorethylene Resin |
| MIL-H-8794D |
Rubber Hose For Use In Hydraulic, Fuel & Oil Lines |
| MIL-H-8795D |
Rubber Hose Assemblies For Use In Hydraulic, Fuel & Oil Systems (Medium Pressure) |
| MIL-H-8796C |
Flexible Air Duct For Use In Aircraft Air-Conditioning & Anti-Icing Systems |
| MIL-C-9074C(GL) |
Cloth, Laminated, Sateen, Rubberized |
| MIL-R-9300B |
Resin, Epoxy, Low-Pressure Laminating |
| MIL-Q-9858A |
Quality Program Requirements |
| MIL-C-10351D(GL) |
Cloth Laminated & Coated For Waterproof Containers |
| MIL-C-10797D(GL) |
Silicone Rubber-Coated Glass Cloth To Be Used In The Fabrication Of Stovepipe Shields |
| MIL-C-10799H |
Cloth, Coated, Cotton, Vinyl Coated, Fire & Mildew Resistant |
| MIL-H-10868F |
Gasoline Utility Hose Assembly Used To Transfer Fuel From The Source To The Stove Adaptor |
| MIL-B-11040E |
Endless, V-Type Engine-Accessory Drive Belts: V-Belts |
| MIL-C-11390C |
Cloth, Laminated, Cotton Balloon-3 Ply-Air-Retaining, Chloroprene |
| MIL-H-11588E |
Hose Assemblies, Rubber, Synthetic, Liquid Petroleum Fuels, Dispensing Collapsible |
| MIL-P-11719E |
ae" Preformed Rubber Packing For Use With Pneumatic Hose Couplings, Universal |
| MIL-P-12420C |
Plastic Material, Cellular, Elastomeric |
| MIL-G-12803C(MR) |
Gasket Material, Including Cork. This Covers Many Grades Of Various Materials. Does Not Cover Molded Gaskets, Rubber Or Plastic Sheet Gaskets Which Are Covered By Other Specifications |
| MIL-C-12189H |
Cloth Coated, Butyl Coated, Toxicological Agents Protective |
| MIL-G-13210(CM1C) |
Rubber Gasket For Making Gas-Tight Connections In The Assembly Of Gas Mask Canisters |
| MIL-M-13231B(ER) |
Marking Of Electronic Items |
| MIL-H-13444E |
Hose and Hose Assemblies, Rubber: Fuel And Oil |
| MIL-H-13524B |
Flexible Hose Assemblies, Metal: Fuel And Oil |
| MIL-F-13526B |
Fiber, Red (Sheet), For Small Arms Buffer Disks |
| MIL-H-13531C |
Hose, Rubber And Hose Assembly, Rubber (Hydraulic, Flexible) |
| MIL-P-13607B |
Padding Materials, Resilient (For Packaging Of Ammunition) |
| MIL-H-13719C |
Two Types Of Hose Assemblies For Use As Flexible Connections On Hydraulic Brake Equipment For Military Vehicles |
| MIL-G-14243C |
3 Types Of Metal And Asbestos Combination Gaskets For High Temp. Application |
| MIL-R-14328B |
Rubber Sheet: Synthetic, Medium Soft, General-Purpose Gasket Material (For Extreme Climatic Conditions) |
| MIL-P-14401B(AT) |
Pads For Cushioning Interior Surfaces Of Military Vehicles To Protect Personnel From Injury |
| MIL-C-14505C |
Cloth, Nylon, Poly Chloroprene-Coated |
| MIL-I-14511C |
Insulation Sheet, Cellular, Plastic: Thermal |
| MIL-P-14574B(MR) |
Packing (Wiper Ring), Synthetic Rubber, Cloth Insert |
| MIL-C-15116C |
Cork Sheet, Bulletin Board |
| MIL-P-15037E |
Plastic Sheet, Laminated, Thermosetting, Glass-Cloth Melamine-Resin |
| MIL-I-15126F |
Insulation Tape, Electrical, Pressure Sensitive Adhesive & Pressure Sensitive Thermosetting Adhesive |
| MIL-P-15280J |
Chemically Expanded Unicellular Elastomeric Plastic Foam Material For Thermal Insulation |
| MIL-E-15330D(SH) |
Expansion Joint, Pipe, Nonmetallic, Fire-Retardant |
| MIL-G-15342E |
Gaskets, Metallic, Spiral Wound For Boilers |
| MIL-M-15562F |
Matting Or Sheet, Floor Covering, Insulating For High Voltage Application |
| MIL-R-15624E |
Rubber Gasket Material-50 Duro (Solid Rubber) Class I Neoprene Class II SBR Class III NBR |
| MIL-G-16265E |
Gaskets, Metallic-Asbestos, Spiral Wound (For Navy Flanged Joints In Piping Systems) |
| MIL-P-16332(BUORD) |
Packing: Flax, Graphite-Coated, Waterproof, Hydraulic Coils |
| MIL-P-16404B |
Five Types of Asbestos Packing Material For Use in Hydraulic & Mechanical Components |
| MIL-I-16411F |
Glass Fiber Insulation Felt For Thermal Insulation Of Machinery & Equipment |
| MIL-I-16562A(OS) |
Expanded Insulation, Insulation, Synthetic, Rubber-Like, Chemically Expanded, Cellular, (Sheet Form) |
| MIL-P-16685D(NAVY) |
Packing, Material And Packing Preformed (Stuffing-Tube For Electric Cables) |
| MIL-G-16959B |
Gaskets: Metallic, Boiler, Economizer and Superheater Handhole |
| MIL-P-17303D(SH) |
Packing Materials, Plastic Metallic And Plastic Nonmetallic |
| MIL-C-17415F |
Cloth Coated & Webbing, Inflatable Boat And Misc. Use |
| MIL-P-17416C |
Flexible Metallic Packing Material (Symbol 1430) |
| MIL-H-17505E(NAVY) |
Smooth-Bore Hose And Hose Assemblies For Suction & Discharge Service For Oil & Gasoline, Rubber |
| MIL-P-17553A(OS) |
Synthetic Rubber O-Ring Preformed Packing, Packing |
| MIL-P-17578A |
Plastic Packing Material (For Dogs for Watertight Closures) |
| MIL-G-17927C |
Gaskets, Glass-Metallic Cover, Silicone Core (Polychloroprene On Nylon) |
| MIL-D-17951E |
Deck Covering, Lightweight, Non-slip, Abrasive Particle Coated Fabric, Film, Or Composite, And Sealing Compound |
| MIL-H-18158D(SH) |
Hose Assembly, Air Duct, Low Pressure, Fabric, Wire Stiffened, Retract Naval Shipboard Portable Ventilating set use |
| MIL-C-19002D |
Cloth Coated & Strip, Coated Cloth |
| MIL-I-19166C |
Glass Fiber, Silicone Adhesive, Pressure-Sensitive Tape, Electrical Insulation Tape |
| MIL-P-19152A(OS) |
Packing, Hydraulic, High Pressure (For Hydropneumatic Systems) |
| MIL-S-19622E(SH) |
Nylon Stuffing Tubes And Packing Assemblies, General |
| MIL-C-19759E |
Cloth Coated, Twill Nylon (Low Count) |
| MIL-G-19769B |
Synthetic Rubber Gaskets, Oil Resistant For Slide Valve (For 21-Inch Submerged Torpedo Tubes) |
| MIL-C-19699D(NU) |
Cloth Coated (Nylon Taffeta) |
| MIL-P-19834B |
Plates, Identification, Metal Foil, Adhesive Backed |
| MIL-P-19918(AER) |
V-Ring Packing |
| MIL-G-20078C |
Gaskets For Ballistic Doors & Hatches |
| MIL-P-20085 |
Plant Or Animal-Fiber Sheet Packing |
| MIL-R-20092L |
Rubber Or Plastic Sheets And Assembled & Molded Shape, Synthetic, Foam or Sponge, Open Cell |
| MIL-H-20176E |
Hose & Hose Assembly, Rubber, Non-collapsible, Smooth Bore, Light Weight Sewage Discharge and Oily Waste Discharge |
| MIL-C-20696E |
Cloth-Coated, Polyester or Nylon, Waterproof |
| MIL-R-21252B(SH) |
Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing |
| MIL-A-21366A(SHIPS) |
Adhesive, for Bonding Plastic Table Top Material, to Aluminum |
| MIL-G-21569B(SHIPS) |
Gaskets, Cylinder Liner Seal, Synthetic Rubber |
| MIL-S-21923(NORD) |
Synthetic Rubber Compound, Butadiene-Styrene Type, Ozone Resistant, For Low Temp. Service |
| MIL-G-2161OB(SHIPS) |
Gasket, Heat Exchanger, Various Cross Section Rings, Synthetic Rubber |
| MIL-P-21929B |
Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid 2 And 4 Pounds Per Cubic Foot |
| MIL-G-22050C(SHIPS) |
Gasket And Packing Material, Rubber, For Use With Polar Fluids, Steam, And Air at Moderately High Temperatures |
| MIL-T-22085D |
Tapes, Pressure-Sensitive, Adhesive, Preservation & Sealing |
| MIL-H-2224OF(SH) |
Rubber Hose, Petroleum Based Fuels & Water Services, Discharge Only, Smooth Bore, Lightweight Buoyant Type |
| MIL-T-22361 |
Thread Compound: Antiseize, Zinc Dust-Petrolatum |
| MIL-S-22473E |
Sealing, Locking, And Retaining Compounds: (Single Component) |
| MIL-D-23003A(SH) |
Solid Deck Covering Compounds, Nonslip, Rollable |
| MIL-23053D |
Insulation Sleeving, Electrical, Heat Shrinkable, General |
| MIL-R-23074C(SH) |
Rubber Tile, Rubber-Air-Lead-Type |
| MIL-S-23586E |
Sealing Compound-Electrical, Silicone Rubber, Accelerator Required |
| MIL-P-23653C |
Plastic Tiles, Vibration Damping Class 1-Temp Range 35* F - 55* F Class 2-Temp Range 55* F - 80* F Class 3-Temp Range 80* F - 155* F |
| MIL-M-24041C |
Molding & Potting Compound Chemically Cured, Poly Urethane |
| MIL-I-24063A(SHIPS) |
Elastomeric Inserts Used With Rubber Insert Sound Isolation Coupling (RISIC-1) Flexible Connectors |
| MIL-P-24074(SHIPS) |
Polytetrafluroethelene Parts & Coatings & Polyamide Parts (PTFE-Teflon) |
| MIL-H-24135A(SH) |
Hose, Synthetic Rubber, Wire Reinforced, And End Fittings, Reusable, For Flexible Hose Assemblies, General |
| MIL-H-24136A(SH) |
Hose, Synthetic Rubber, Synthetic Fiber Reinforced, And End Fittings, Reusable, For Flexible Hose Assemblies, General |
| MIL-E-24142/6G(SH) |
Enclosure, Submersible (15FT), Size 8 By 10 Through 14 By 26 |
| MIL-A-24179A(SHIPS) |
Adhesive, Flexible Unicellular-Plastic Thermal Insulation |
| MIL-T-24180A(SH) |
Rubber Tile, Underwater Acoustic Decoupler |
| MIL-T-24503A(SH) |
Packing Material, Graphitic, Corrugated Ribbon Or Textured Tape And Preformed Ring |
| MIL-H-24580(SH) |
Hose Assemblies, Synthetic Rubber, Noncollapsible, Fire Fighting |
| MIL-P-24583A(SH) |
Graphitic Or Carbon Braided Yarn Packing Material |
| MIL-G-24696(SH) |
Non-Asbestos Sheet Gasket Material |
| MILL-DTL-24777 |
|
| MIL-C-25050A(ASG) |
General Requirements For Colors, Aeronautical Lights & Equipment |
| MIL-C-25437A |
Hydraulic, Self-Sealing, Quick Disconnect Coupling Assembly |
| MIL-P-25732C |
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service At 275* F (135* F) (O-Ring Packings) |
| MIL-R-25988B |
Rubber, Fluorosilicone Elastomer, Oil And Fuel Resistant, Sheets, Strips, Molded Parts, And Extruded Shapes |
| MIL-P-26514F |
Polyurethane Foam, Rigid Or Flexible, For Packaging |
| MIL-H-26521F |
Hose And Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temp. With Reattachable Couplings |
| MIL-C-26712B |
Cloth, Coated, Nylon, Chloroprene-Coated |
| MIL-C-26861C |
Cushioning Material, Resilient Type, General For Rolls, Sheets, Special Die-Cut Pads, Or Molded Forms As Specified |
| MIL-H-27267B |
Hose, Tetrafluoroethylene, High Temp. Medium Pressure |
| MIL-S-27332A(USAF) |
Seat Cushion Insert, Polyurethane Foam, Plastic (General Spec) |
| MIL-C-27487F |
Coupling Halves, Quick-Disconnect, Cam-Locking Type |
| MIL-H-27516D |
Hose And Hose Assembly, Nonmetallic, Suction & Discharge |
| MIL-T-27730A(ASG) |
Tape, Antiseize, Polytetrafluoroethylene, With Dispenser |
| MIL-H-28596B |
Hose And Hose Assembly, Rubber, Steam |
| MIL-C-40039C |
Cloth, Coated, Nylon, Vinyl Coated |
| MIL-P-40619A |
Plastic Material, Cellular, Polystyrene (For Bouyancy Applications) |
| MIL-C-43006G |
Cloth & Strip, Laminated Or Coated, Vinyl-Nylon Or Polyester High Strength, Flexible |
| MIL-C-43062D |
Cloth, Coated, Nylon, Resin Modified Butyl Coated, Acid & Fuel Resistant |
| MIL-C-43086C |
Cloth, Coated, Nylon, Vinyl Coated (For Air Supported Shelters) |
| MIL-M-43719B |
Marking Materials And Markers, Adhesive, Elastomeric, Pigmented: General |
| MIL-S-45005C(AT) |
Seal-Plain & Seal Encased: Fluid Radial, Single & Multiple Lip Sealing Member (Springloaded) |
| MIL-R-45036D(MR) |
Rubber, Hard (Ebonite), Natural Or Synthetic, Sheet Strip, Rod, Tubing, And Molded Parts |
| MIL-S-45180D |
Sealing Compound, Gasket, Hydrocarbon, Fluid And Water Resistant |
| MIL-I-45208A |
Inspection System Requirements |
| MIL-STD-45662 |
Calibration Systems Requirements |
| MIL-A-46050C |
Adhesive, Cyanoacrylate, Rapid Room-Temperature Curing, Solventless |
| MIL-R-46082B |
Retaining Compounds, Single Component, Anaerobic |
| MIL-R-46089B(MI) |
Silicone Sponge (Synthetic) Rubber Of The Closed Cell Type |
| MIL-T-46114B |
Glass-Setting Tape, A Composition Of Uncured Rubber And Cotton Fiber, Used For Sealing Glass In Metal Channels |
| MIL-A-46146A |
Adhesives-Sealants, Silicone, RTV, Noncorrosive (For Use With Sensitive Metals And Equipment) |
| MIL-R-46846A(MI) |
Synthetic Rubber, Heat Shrinkable |
| MIL-G-47197B(MI) |
Gasket, Shielding, Electronic-Oriented Wires Embedded In Silicone Rubber, Pressure Seal |
| MIL-R-47211A |
Rubber (Solid), Silicone, RTV |
| MIL-G-50960(MU) |
Gasket (For The Indicator Humidity Plug For Containers) |
| MIL-R-51209(MU) |
Two Types Of Synthetic Rubbers Employing Styrene & Butadiene Polymer
Type I SBR Type 1000 Class I Baled
Type II SBR Type 1006 Class I Baled Class II Crumbed
|
| MIL-C-51234(MU) |
Coupling Assembly, Quick Disconnect, Plain & Self Sealing |
| MIL-R-51283C |
Rubber Fabricated Products For M17A1/M17A2 Masks Made Of Vulcanized Rubber, Synthetic Rubber, Or Rubber-Like Composition Alone or in Combination |
| MIL-H-52079B(AT) |
Hose, Preformed: Semi-Flexible, Reinforced |
| MIL-H-52262D(ME) |
Hose, Assembly Rubber: Lightweight, collapsible, 4-Inch |
| MIL-H-52544B(ME) |
Hose, Rubber: Oil Suction, Wire-Reinforced |
| MIL-B-52761(ME) |
Belting, Flat: Conveyor, Rubber Industrial Synthetic Reinforcement |
| MIL-P-60312C(AR) |
Parts, Molded, Plastic Foam, Polystyrene (For Use With Ammunition) |
| MIL-T-60394A(AR) |
Tape-Pressure-Sensitive Adhesive Film Foam Double-Coated (For Use With Ammunition) |
| MIL-R-60671(MU) |
Rubber, Chlorinated, Natural: Powdered |
| MIL-H-62028(MO) |
Hose, Air Duct: High-Temperature, Flexible, Reinforced |
| MIL-H-62217A(AT) |
Hose & Hose Assemblies, Non-Metallic, Silicone, Polyester & Wire Reinforced (For Coolant & Heating Systems Of Diesel & Gasoline Powered Engines) |
| MIL-R-70337 |
Ring, Retaining, Round Section |
| MIL-R-81090(OS) |
Rubber (Solid), Electrically Conductive, Fuel Resistant |
| MIL-B-81705B |
Barrier Materials, Flexible, Electrostatc-free, Heat Sealable |
| MIL-P-81716 |
Packing, Preformed, Straight Thread Tube Fitting Boss, Type II Hydraulic (-65* F to +275* F) |
| MIL-R-81828(AS) |
Rubber, Cholorsulfonated Polyethylene Elastomer, Sheet & Molded Shapes, Ozone Resistant |
| MIL-L-81913(AS) |
Leather, Cowhide Vegetable Tanned, For Packing & Seal |
| MIL-T-81914(AS) |
Tubing, Plastic, Flexible, Convoluted, Conduit |
| MIL-R-83248B |
Rubber Fluorcarbon Elastomer, High Temp., Fluid, And Compression Set Resistant |
| MIL-R-83285(USAF) |
Rubber, Ethylene-Propylene |
| MIL-I-83387A(USAF) |
General Procedural Requirements Necessary For The Performance Of Magnetic Rubber Inspection |
| MIL-R-83397A |
Rubber, Polyurethane, Castable, Humidity Resistant |
| MIL-R-83412A(USAF) |
Rubber, Ethylene-Propylene, Hydrazine Resistant |
| MIL-R-83485(USAF) |
Rubber, Fluorobarbon Elastomer, Improved Performance At Low Temperatures |
| MIL-G-83528A |
Gasketing Material, Conductive, Shielding Gasket, Electronic Elastomer, EM1/RF1 |
| MIL-P-87175(USAF) |
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Phosphonitrilic |
